欧美三区美女,亚洲人成午夜免电影费观看,亚洲综合一区二区三区,神马久久资源

GENERAL TERMS AND SPECIAL CONDITIONS

“Our best service is your success”is our company's motto. It is our promising you with the best quality, lowest price and on time delivery. So, any of our customers' requirements, questions and comments will be welcomed at any time. You will always find us willing to make the extra effort to keep you a satisfied customer.  
We would like to announce our business terms and conditions as following to you who is interested in establishing trade relationship with our company.We can only accept the order and delivery the materials based on these terms and conditions as followings.

Asking a quotation
For the sake of our co-operation, please try to let us know the details of your requirements, the more,the better. The information we should know before we send our quotation is listed as below:
Density
The range of density in g/cm3 or g/in3
Drawing
:The drawing which would be needed must be offered by the customers
Dimensions: The dimensions should be informed together with tolerances----It can be financially disastrous to insist on unnecessarily close tolerances with small-Batch hardmetal components. Quoted tolerances vary, but are generally of the order of +/- 3 per cent or +/-3mm(whichever is the greater) for non-standard as-sintered components. Die-pressed standard items may have tolerances of +/-1 per cent and exceptionally much less, especially on long production runs. Friction-held inserts for parting and turning tools. Dissimilar grades have different shrinkage factors, and produce part of
slightly different size when made in the same die at the same pressure. Apart from variations in size, warping and shape changesdue to unbalanced shrinkagemay also occur, particularly with grades of high binder content. In general, carbide should either be used in such a way that small departures from nominal as-sintered shape and size can be tolerated, or else an adequate allowance must be made for grinding or otherwise finishing to final size. and their unit in mm or inch
Usage: The usage is very important for us to produce an available products
Package:Please let us know the package form and the net weight per unit and if the wooden box can be accepted

Special Conditions for different types of products

 Quotation Form for tungsten intermediate products               

Products

WO3%
min.

Density
g/cm3

Quantity

Delivery Term

Special Requirements

MT

kgm

 

 

 

 

 

 

 

Notes

Quantity

Standard quantity 17-18MT(one container)
Small quantity: 100kgs-17MT
Sample quantity: less than 100kgs

Process Method

Please let us know in which production process method are you interested

Quotation form for tungsten final products

For tungsten powder

Products

W %

Grain Size (u)

Quantity

Delivery Term

Special Requirements

MT

kgm

  

  

  

  

  

   

  

Notes

Quantity

 

Standard quantity 1MT

Small quantity: 100kgs-999kgs

Sample quantity: less than 100kgs

Size

The range of grain size and the unit of grain size in FSSS value(Fisher Sub-Sieve Sizer) micron or mesh

For tungsten carbide powder

Products

WC( % )

Grain Size(u)

C content

Quantity

Delivery Term

Special Requirements

Free C%

Toatl C%

MT

kg

 

 

 

 

 

 

 

 

 

Product Number

NOTES

Quantity Standard quantity 1MT

Small quantity: 100kgs-999kgs

Sample quantity: less than 100kgs

Size The range of grain size and the unit of grain size in FSSS value(Fisher Sub-Sieve Sizer) micron or mesh


For mixed tungsten carbide (ready for pressing)

W C

%min.

Grain Size(u)

Other content

ISO Grade

Quantity

Delivery Term

Special Requirements

Co

Ti

TaC

MT

kg

                   

Product Number

NOTES

Quantity Standard quantity 1MT

Small quantity: 100kgs-999kgs

Sample quantity: less than 100kgs

Size The range of grain size and the unit of grain size in FSSS value

(Fisher Sub-Sieve Sizer Value) micron or mesh


Quotation Form for tungsten carbide products

Grade

Qantity

Delivery terms

Special Requirements

CN

ISO

WC

Co

Ti

Ta

Ni

Pcs

kgs

                     

Products Number 

NOTES

Quantity :Formal order or samples for testing in PCs or in kgs

Grade(composition): ISO application code or Chinese grade or any special grade ,if it is a special grade, the main composition in the raw materials (the powder mixture) weight per cent should be informed

Hardness: The minimum value of hardness (HRA or HV) must be informed

Transverse Rupture Strength :in N/mm2 or kgf/mm2

Status: Blank(semi-finished) or finished, grounded or ungrounded

Porosity: A--, B--, C--,

Magnetic: Magnetic or non-magnetic

Grain size: The grain size and the unit of grain size in FSSS (Fisher Sub-Sieve Sizer)micron or mesh of the raw materials


Quotation form for tungsten and molybdenum wire

Products No.

Dia.

Status

Quantity

Delivery Term

Special Requirements

mm

Mg/200m

See Notes

10km

kgs

   
             

NOTES

Quantity :Formal order or samples for testing in PCs or in kgs,and our min. quantity

for the formal order is 10km or 10kgm.

Status: We should be informedthat the status of the wire and/or heater such as

Cleaned or Black, Doped or Pure, Stranded or Straight, Coiled or PCs, if coiled,

the inside diameter of coil must be informed

Drawing :The drawing must be offered by the customer for metallising heater

Dimensions: The dimensions of Diameter and length should be informed together with tolerances and their unit in mm or inch


Quotation form for tungsten  Heater

Products Drawing No.

Dimensions

Status

Quantity

Delivery Term

Special Requirements

See Table below

See Notes

10km

kgs

                 

NOTES

Quantity :Formal order or samples for testing in PCs or in kgs,and our min. quantity

for the formal order is 10km or 10kgm.

Status :We should be informedthat the status of the wire and/or heater such as

Cleaned or Black, Doped or Pure, Stranded or Straight, Coiled or PCs, if coiled,

the inside diameter of coil must be informed

Drawing :The drawing must be offered by the customer for metallising heater

Dimensions: The dimensions of Diameter and length should be informed together with tolerances and their unit in mm or inch

Making a contract

We accept the contract made by fax or original copy by mail whatever the contact method is telephone, fax and/or email ,we have the present contract form and if you would like to use it, we’ll send it to you as soon as got your confirmation.

Prices Principle

Owing to the frequent fluctuation of the tungsten products’ price, we are very sorry for we could not list all the present prices with the introduction to our products in this site. But we’ll be very glad to send you our present prices on the our general principle as following according to your requirement(s) :

1. If the quantity is lower than the formal order , the prices of little quantity is higher than the normal price; and

2. The price of long-term contract is lower than the price of odd lot; and

3.The price of our standard products is lower than the price of the special order which ordered our products with special requirements

4. The price which we send to you must be FOB the Chinese main port if you have not yet let us know your requirements of Transport method and terms----we always delivery the commodities according to our customers’ instructions or our contract terms. the method can be used such as Sea freight Air freight and Express mail (DHL, UPS, FedEx, TNT, EMS )

Payment terms

We only accept the payment method is payment in advance by Telegraphic Transfer(T.T.)----the bank fee(s) will be deducted from the payments, Check, or Irrevocable Letter of Credit (L/C) which is opened according to Uniform Customs and Practices for Documentary Credit(19thversion) ,International Chamber of commerce, Paris, France, Publication No.500,unless agree to in writing by our General Manager or Sale manager.

Documents Avialable

We will offer documents as Commercial Invoice, Packing List, Bill of Landing, Certificate of Analysis---- The analysis results mentioned in this web site represent the general quality of our commodities, so we can not guarantee commodities we supply or samples we send are strictly in conformity with our statement here. Then the above descriptions of the commodities are for your purchase reference only. We have no responsibility for any problem arising from misuse of these descriptions. Meanwhile, if it is required we can offer

1.Certificate of Quantity and/ or Quality effected by China Commodity Inspection Bureau (CCIB);

2) Generalized System of Preference Certificate of Origin Form-A (GSP Form-A (green ));

3) If it is needed and the related expenses may be paid by the buyer, we can provide the buyer with SGS Certificate (effected by SGS- CSTC Standards Technical Services Ltd.).

4) Materials Safety Data Sheet(MSDS) It will be supplied by our technical staff, based upon their knowledge and experiences, and for the buyer’s reference only, but it is not as a document for negotiation and not a warranty for quality.

Tax, Fee and Customs

Any tax, duty, custom, inspection, or testing fee or any other tax ,fee, or charge of any nature imposed by any government should be paid by the buyer in addition to the contract price as quoted or invoiced, unless it has been stated as a responsibility of us in the contract between us and the buyer.

Samples for testing

We would like to offer free samples of some of products which we have the stock if our customers may pay the transport fee and any related expenses in advance.

Errors and Shortage

Errors in our documents and shortage of our commodities must be reported in writing (fax or letter or email ) within 5 working days of receipt of the commodities.


[Homepage]   [Chinese Version]    [Visit Us]    [Feedback]   [Search]
© Copyright 2000  ChinaTungsten Online

 

 

 

欧美三区美女,亚洲人成午夜免电影费观看,亚洲综合一区二区三区,神马久久资源
视频一区视频二区中文字幕| 亚洲成人精品影院| 欧美精品一卡二卡| 欧洲人成人精品| 95精品视频在线| 成人99免费视频| av亚洲精华国产精华| 亚洲国产欧美在线| 国产视频一区二区三区在线观看| 日韩美一区二区三区| 2022国产精品视频| 国产日韩欧美高清| 中文成人综合网| 最好看的中文字幕久久| 亚洲人亚洲人成电影网站色| 亚洲色欲色欲www在线观看| 一区二区三区色| 图片区小说区区亚洲影院| 久久精品国产77777蜜臀| 久久se精品一区精品二区| 国内精品嫩模私拍在线| 成人免费看视频| 色偷偷久久一区二区三区| 日韩精品资源二区在线| 日韩欧美成人激情| 欧美自拍偷拍一区| 91精品在线免费| 欧美本精品男人aⅴ天堂| 国产日韩高清在线| 亚洲精品久久久蜜桃| 亚洲mv大片欧洲mv大片精品| 久久精品av麻豆的观看方式| 国产99久久久精品| 色av成人天堂桃色av| 欧美日韩国产一二三| 9久草视频在线视频精品| 国产在线精品不卡| 波多野结衣在线一区| 欧美亚洲一区二区在线观看| 宅男噜噜噜66一区二区66| 亚洲精品在线一区二区| 日韩一区中文字幕| 日韩一区欧美二区| 国产成人无遮挡在线视频| 日本道免费精品一区二区三区| 丝袜亚洲另类欧美| 91精品国产一区二区| 日韩一区二区影院| 亚洲1区2区3区4区| 国产麻豆视频精品| 日本高清不卡aⅴ免费网站| 精品日韩欧美一区二区| 亚洲视频图片小说| 精品在线你懂的| 欧美性xxxxxxxx| 高清不卡一区二区在线| 99国产一区二区三精品乱码| 欧美电影在线免费观看| 懂色av噜噜一区二区三区av| 国产一区二区毛片| av午夜一区麻豆| 欧美成人精精品一区二区频| 亚洲人精品午夜| 国内欧美视频一区二区| 日本大香伊一区二区三区| 欧美经典一区二区| 视频在线在亚洲| 国产精品二三区| 国产精品乱人伦中文| 青娱乐精品视频在线| www.欧美.com| 中文字幕综合网| 欧美综合天天夜夜久久| 日韩综合在线视频| 这里只有精品视频在线观看| 日本一区二区高清| 亚洲成人av一区二区| 成人av网址在线观看| 国产黄色91视频| 亚洲欧洲99久久| 欧美成人国产一区二区| 蜜桃传媒麻豆第一区在线观看| 高清视频一区二区| 久久影院视频免费| 麻豆免费精品视频| 久草精品在线观看| 91精品国产入口| 国产亚洲欧美中文| 九一久久久久久| 7777精品伊人久久久大香线蕉完整版 | 中文字幕第一区二区| 久久99久久久久| 欧美电影一区二区| 亚洲国产一区二区a毛片| 97久久精品人人做人人爽50路| 国产日韩精品久久久| 丰满白嫩尤物一区二区| 久久精品在这里| 国产精品一级片| 国产亚洲精品超碰| 美女网站视频久久| 欧美不卡视频一区| 激情综合一区二区三区| 精品人伦一区二区色婷婷| 久久精品999| 亚洲精品一区二区三区99| 精品一区二区三区免费观看| 精品久久久久一区二区国产| 国产综合色在线视频区| 久久久久久99精品| 国产精品亚洲成人| 国产精品电影院| 91黄色免费看| 日本亚洲天堂网| 精品福利av导航| 国产精品一区专区| 成人欧美一区二区三区1314| 色妞www精品视频| 亚洲电影你懂得| 日韩精品一区二区三区视频在线观看 | 免费久久精品视频| 欧美成人精品福利| 成人性生交大片免费看视频在线| 国产精品国产馆在线真实露脸| 色av成人天堂桃色av| 日韩国产欧美三级| 亚洲精品一区二区三区香蕉| 成人听书哪个软件好| 亚洲一区视频在线| 精品国产污污免费网站入口 | 精品三级在线看| 国产成人在线看| 一区二区在线免费| 欧美一区二区高清| 成人一区二区三区在线观看| 亚洲综合视频在线观看| 日韩三区在线观看| 成人a区在线观看| 日韩av在线播放中文字幕| 久久久精品综合| 91国在线观看| 黄色日韩网站视频| 一区二区三区电影在线播| 在线综合亚洲欧美在线视频| 成人免费av网站| 一区二区三区欧美日韩| 欧美在线视频日韩| 久久99久久精品| 久久久精品影视| 欧美性色欧美a在线播放| 久久精品国产**网站演员| 亚洲免费伊人电影| 亚洲国产精品t66y| av中文一区二区三区| 中文字幕在线观看一区| 日韩免费电影网站| 欧美私人免费视频| 国产成人在线电影| 青椒成人免费视频| 亚洲女与黑人做爰| 国产亚洲精品中文字幕| 欧美一区二区三区四区久久| 91一区在线观看| 国产尤物一区二区| 蜜桃一区二区三区在线| 亚洲欧美一区二区三区孕妇| 久久久久9999亚洲精品| 日韩一区二区在线看片| 欧美在线看片a免费观看| www.激情成人| 六月丁香婷婷久久| 一区二区三区在线看| 国产精品国产自产拍在线| 欧美日韩mp4| www.亚洲免费av| 国产在线精品一区二区三区不卡| 亚洲成人av免费| 一区二区三区精品久久久| 国产精品乱码妇女bbbb| 久久久久88色偷偷免费| 日韩一区二区三区视频| 欧美三级视频在线观看| 色综合久久久久| av一区二区三区| 国产suv精品一区二区883| 美女精品自拍一二三四| 亚洲欧美乱综合| 欧美三级韩国三级日本三斤 | 99在线精品免费| 久久品道一品道久久精品| 综合中文字幕亚洲| 亚洲欧洲国产日本综合| 久久久精品欧美丰满| 51精品久久久久久久蜜臀| 91黄视频在线| 91免费观看视频| eeuss鲁片一区二区三区在线观看 eeuss鲁片一区二区三区在线看 | 性做久久久久久免费观看 | 成人免费av在线| 激情国产一区二区|